Linux下一般使用sane做为扫描仪驱动程序,安装命令如下:
sudo apt-get install sane sane-utils xsane
sudo sane-find-scanner
scanimage -L
simple-scan
~$ sudo apt-get install sane sane-utils xsane
~$ sudo sane-find-scanner
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a kernel SCSI driver for your SCSI adapter.
found USB scanner (vendor=0x04a9 [Canon], product=0x1909 [CanoScan], chip=GL124) at libusb:002:004
could not open USB device 0x8087/0x0024 at 002:002: Access denied (insufficient permissions)
# Your USB scanner was (probably) detected. It may or may not be supported by
# SANE. Try scanimage -L and read the backend's manpage.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.
# You may want to run this program as root to find all devices. Once you
# found the scanner devices, be sure to adjust access permissions as
# necessary.
~$ scanimage -L
device `genesys:libusb:002:004' is a Canon LiDE 110 flatbed scanner
~$ simple-scan