/* Update Scan data */
{
uint8_t scan_data[31] =
{
0x14, /*len 1*/
AD_TYPE_MANUFACTURER_SPECIFIC_DATA,/*type 1*/
0x7e, 0xff, /*manuf id 2*/
/* The following are your payload */
0x05, 0x01, /*type code 2*/
0x01, 0x00, /*fun code 2*/
0x10, 0x0a, /*fw ver 2*/
0x01, 0x22, /*battery 2*/
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,/*mac 6*/
0x00, /*enroll flag 1*/
0x32, /*protocol ver 1*/
0x01, /*trigg reason 1*/
};
const uint8_t *bd_addr = BleGetBdAddress();
/* set mac addr big endian */
scan_data[12] = bd_addr[5];
scan_data[13] = bd_addr[4];
scan_data[14] = bd_addr[3];
scan_data[15] = bd_addr[2];
scan_data[16] = bd_addr[1];
scan_data[17] = bd_addr[0];
ret = hci_le_set_scan_response_data(scan_data[0]+1, scan_data);
if(BLE_STATUS_SUCCESS == ret)
{
printf("set scan data ok \r\n");
}
else
{
printf("set scan data fail \r\n");
}
}
/* Start Fast or Low Power Advertising */
ret = aci_gap_set_discoverable(
ADV_IND,/*普通可链接广播*/
Min_Inter,
Max_Inter,
PUBLIC_ADDR,
NO_WHITE_LIST_USE, /* use white list */
sizeof(local_name),
(uint8_t*) &local_name,
BleApplicationContext.BleApplicationContext_legacy.advtServUUIDlen,
BleApplicationContext.BleApplicationContext_legacy.advtServUUID,
0,
0);
STM32WB55设置扫描广播包数据
猜你喜欢
转载自blog.csdn.net/qq_28851611/article/details/107399959
今日推荐
周排行