一、添加临时路由(重启后路由失效)
[root@local~]#route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
0.0.0.0 192.168.85.2 0.0.0.0 UG 100 0 0 eth0
10.28.0.0 192.168.85.2 255.255.0.0 UG 100 0 0 eth0
192.168.85.0 0.0.0.0 255.255.255.0 U 100 0 0 eth0
192.168.122.0 0.0.0.0 255.255.255.0 U 0 0 0 virbr0
[root@local~]#route add -net 172.168.0.0 netmask 255.255.0.0 gateway 192.168.85.2 #添加172.168.0.0段路由
使用route -n查看当前系统路由
[root@local ~]#route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
0.0.0.0 192.168.85.2 0.0.0.0 UG 100 0 0 eth0
10.28.0.0 192.168.85.2 255.255.0.0 UG 100 0 0 eth0
172.168.0.0 192.168.85.2 255.255.0.0 UG 0 0 0 eth0 #路由生效
192.168.85.0 0.0.0.0 255.255.255.0 U 100 0 0 eth0
192.168.122.0 0.0.0.0 255.255.255.0 U 0 0 0 virbr0
主机路由同上方法
二、静态路由配置(重启后依然生效)
1、进入到网络配置文件目录
cd /etc/sysconfig/network-scripts/
2、创建route-interface文件 #interface名需要与网卡名称对应(以网卡名为eth0网卡举例)
3、编辑vim route-eth0文件
wq保存退出
4、使用service network restart重启网络服务使网络服务生效
出现ok字样表示重启网络服务成功
查看当前路由