【jetson nano】SD卡驱动挂载到nano板
【jetson nano】SD卡驱动挂载到nano板
)
前言
Jetson nano搭载四核Cortex-A57 MPCore 处理器,采用128 核 Maxwell™ GPU。支持JetPack SDK. 支持主流的AI框架和算法,例如TensorFlow, PyTorch, Caffe/Caffe2, Keras, MXNet等。
淘宝上博主购入nano板时,苦于囊中羞涩,内存只有16G,需要自备一张SD卡挂载。
一、驱动下载
下载链接:驱动下载链接
二、文件复制到设备
将tegra210-p3448-0002-p3449-0000-b00.dtb文件复制到设备上,然后复制到/boot目录下
sudo cp tegra210-p3448-0002-p3449-0000-b00.dtb /boot
三、编辑系统驱动文件
编辑/boot/extlinux/extlinux.conf配置文件
sudo gedit /boot/extlinux/extlinux.conf
将下述内容直接贴在.conf文件中
TIMEOUT 30
DEFAULT primary
MENU TITLE L4T boot options
LABEL primary
MENU LABEL primary kernel
LINUX /boot/Image
INITRD /boot/initrd
FDT /boot/tegra210-p3448-0002-p3449-0000-b00.dtb
APPEND ${
cbootargs} quiet root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0
# When testing a custom kernel, it is recommended that you create a backup of
# the original kernel and add a new entry to this file so that the device can
# fallback to the original kernel. To do this:
#
# 1, Make a backup of the original kernel
# sudo cp /boot/Image /boot/Image.backup
#
# 2, Copy your custom kernel into /boot/Image
#
# 3, Uncomment below menu setting lines for the original kernel
#
# 4, Reboot
# LABEL backup
# MENU LABEL backup kernel
# LINUX /boot/Image.backup
# INITRD /boot/initrd
# APPEND ${
cbootargs}