网络拓扑如下图:
R1中配置:
<Huawei>system-view 进入系统视图
[Huawei]sysname R1 设备名改为R1
[R1]int G0/0/0 进入G0/0/0端口
[R1-GigabitEthernet0/0/0]ip add 192.168.10.1 24[R1]user-interface vty 0 4 设置VTY连接数为五个
[R1-ui-vty0-4]user privilege leve 3 用户的权限等级为3
[R1-ui-vty0-4]authentication-mode password 设置远程连接密码
Please configure the login password (maximum length 16):Huawei@123[R1-ui-vty0-4]quit
[R1]ping 192.168.10.2
PING 192.168.10.2: 56 data bytes, press CTRL_C to break
Reply from 192.168.10.2: bytes=56 Sequence=1 ttl=255 time=80 ms
Reply from 192.168.10.2: bytes=56 Sequence=2 ttl=255 time=10 ms
Reply from 192.168.10.2: bytes=56 Sequence=3 ttl=255 time=20 ms
Reply from 192.168.10.2: bytes=56 Sequence=4 ttl=255 time=20 ms
Reply from 192.168.10.2: bytes=56 Sequence=5 ttl=255 time=20 ms--- 192.168.10.2 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 10/30/80 ms
R2中配置:
<Huawei>system-view
[Huawei]sysname R2
[R2]int G0/0/0
[R2-GigabitEthernet0/0/0]ip add 192.168.10.2 24
[R2-GigabitEthernet0/0/0]quit<R2>telnet 192.168.10.1 远程连接输入密码成功进入
Press CTRL_] to quit telnet mode
Trying 192.168.10.1 ...
Connected to 192.168.10.1 ...Login authentication
Password:
<R1>