1.准备一个测试邮箱账号:如[email protected],作为发件人。
注意:保证邮箱的pop3/smtp是开启状态;
如下:
并且开通授权码,记下自己邮箱的授权码。
2.编辑配置文件/etc/mail.rc,添加如下内容:
#########################
set [email protected]
set smtp=smtp.163.com
set [email protected]
set smtp-auth-password=刚刚的授权码
set smtp-auth=login
########################
3.测试一下:
echo "test content!!" | mail -s "test" [email protected]
可以看到[email protected]邮箱已经收到了刚刚配置的[email protected]作为发件人发过来的邮件。
4.写一个告警的脚本:
#!/bin/bash
rate=$(df -h | grep "/dev/sda2" | awk '{printf $5}' | cut -d "%" -f 1)
if [ $rate -ge 20 ];then
echo "warning!/dev/sda2 is full!!"
echo "/dev/sda2 is full!!please handle now!!" | mail -s "/dev/sda2 is full" [email protected]
fi