1、查看软连接,只需要替换软连接的库即可
2、
系统性能测试工具:
\\10.10.10.164\Common_Repository\DDR相关工具
瑞芯微芯片专用芯片性能测试工具,支持RK全部芯片。
打印性能和cpu占用率指标示例(rk-msch-probe_XX工具使用方法参考文档)
$ rk-msch-probe_v1.06 -c rv1126 -f 924 & top -d 2
将CPU修改为性能模式:
echo performance > /sys/devices/system/cpu/cpufreq/policy0/scaling_governor
cat /sys/devices/system/cpu/cpu*/cpufreq/cpuinfo_cur_freq
rv1126 npu定频600:
cat /sys/devices/platform/ffbb0000.rkvenc/devfreq/ffbb0000.rkvenc/cur_freq
echo 600000000 > /sys/devices/platform/ffbc0000.npu/devfreq/ffbc0000.npu/min_freq
echo 600000000 > /sys/devices/platform/ffbc0000.npu/devfreq/ffbc0000.npu/max_freq
cat /sys/devices/platform/ffbc0000.npu/devfreq/ffbc0000.npu/cur_freq
3、
rv1126单个npu功能测试工具:
mediaserver -S -d -c ../share/mediaserver/rv1109-uvc/camera_nv12_rga_nn_link-facelandmark.conf
4、
打印帧率代码:
int64_t SystemTime2() {
struct timespec t;
t.tv_sec = t.tv_nsec = 0;
clock_gettime(CLOCK_MONOTONIC, &t);
return (int64_t)(t.tv_sec) * 1000 + t.tv_nsec / 1000000;
}
void DumpFps() {
static int mFrameCount;
static int mLastFrameCount = 0;
static int mLastFpsTime = 0;
static float mFps = 0;
mFrameCount++;
int64_t now = SystemTime2();
int64_t diff = now - mLastFpsTime;
if (diff > 500) {
mFps = ((mFrameCount - mLastFrameCount) * 1000) / diff;
mLastFpsTime = now;
mLastFrameCount = mFrameCount;
LOG("---mFps = %2.3f\n", mFps);
}
}
5、
1109上面,设置定频和查看频率的命令(UAC测算CPU占用率的时候):
查看cpu频率:cat /sys/devices/system/cpu/cpufreq/policy0/cpuinfo_cur_freq
查看支持的频率:cat /sys/devices/system/cpu/cpufreq/policy0/scaling_available_frequencies
定频:echo userspace > /sys/devices/system/cpu/cpufreq/policy0/scaling_governor
设置频率1g: echo 1008000 > /sys/devices/system/cpu/cpufreq/policy0/scaling_setspeed