1.判断语句
1.1 if
格式:
if(关系表达式){ 语句体; }
1.2 if...else
格式:
if(关系表达式) { 语句体1; }else { 语句体2; }
public static void main(String[] args) { //定义变量 int a = 2; if (a % 2 == 1){ System.out.println("奇数"); }else{ System.out.println("偶数"); } }
1.3 if...else if...else
格式:
if (判断条件1) { 执行语句1; } else if (判断条件2) { 执行语句2; } ... }else if (判断条件n) { 执行语句n; } else { 执行语句n+1; }
public static void main(String[] args) { //定义变量 int x = 2; int y; //判断语句 if(x >= 3){ y = 2 * x + 1; }else if (x > -1 && x < 3){ y = 2 * x; }else { y = 2 * x - 1; } System.out.println(y); }
举例:
public static void main(String[] args) { int score = 100; if(score<0 || score>100){ System.out.println("你的成绩是错误的"); }else if(score>=90 && score<=100){ System.out.println("你的成绩属于优秀"); }else if(score>=80 && score<90){ System.out.println("你的成绩属于好"); }else if(score>=70 && score<80){ System.out.println("你的成绩属于良"); }else if(score>=60 && score<70){ System.out.println("你的成绩属于及格"); }else { System.out.println("你的成绩属于不及格"); } }
1.4 if语句和三元运算符的互换
public static void main(String[] args) { int a = 10; int b = 20; //定义变量,保存a和b的较大值 int c; if(a > b) { c = a; } else { c = b; } //可以上述功能改写为三元运算符形式 c = a > b ? a:b; }
2.switch语句
switch(表达式) { case 常量值1: 语句体1; break; case 常量值2: 语句体2; break; ... default: 语句体n+1; break; }
public static void main(String[] args) { //定义变量,判断是星期几 int weekday = 6; //switch语句实现选择 switch(weekday) { case 1: System.out.println("星期一"); break; case 2: System.out.println("星期二"); break; case 3: System.out.println("星期三"); break; case 4: System.out.println("星期四"); break; case 5: System.out.println("星期五"); break; case 6: System.out.println("星期六"); break; case 7: System.out.println("星期日"); break; default: System.out.println("你输入的数字有误"); break; } }
switch语句中,表达式的数据类型,可以是byte,short,int,char,enum(枚举),JDK7后可以接收字符串;
2.1 case穿透
在switch语句中,如果case的后面不写break,将出现穿透现象,也就是不会在判断下一个case的值,直接向后运行,直到遇到break,或者整体switch结束;
public static void main(String[] args) { int i = 5; switch (i){ case 0: System.out.println("执行case0"); break; case 5: System.out.println("执行case5"); case 10: System.out.println("执行case10"); default: System.out.println("执行default"); } }上述程序中,执行case5后,由于没有break语句,程序会一直向后走,不会在判断case,也不会理会break,直接运行完整体switch;
由于case存在穿透性,因此初学者在编写switch语句时,必须要写上break;
3.for语句
3.1 for
格式:
for(初始化表达式①; 布尔表达式②; 步进表达式④){ 循环体③ }
public static void main(String[] args) { for (int i = 0; i <= 10; i++){ System.out.println("renmin" + " " + i); } }
练习:计算1-100之间的偶数之和
public static void main(String[] args) { for (int i = 0; i <= 10; i++){ System.out.println("renmin" + " " + i); } int sum = 0; for (int i = 0; i <= 100; i++){ if (i % 2 == 0){ sum +=i; } } System.out.println(sum); }
4.while语句
格式
初始化表达式① while(布尔表达式②){ 循环体③ 步进表达式④ }
练习:计算1-100之间的和
public static void main(String[] args) { //初始化 int i = 1; int sum = 0; //循环 while (i <= 100){ sum += i; i++; } System.out.println(sum); }
5.do...while语句
格式:
初始化表达式① do{ 循环体③ 步进表达式④ }while(布尔表达式②);
do...while循环的特点:无条件执行一次循环体,即使我们将循环条件直接写成false,也依然会循环一次。这样的循环具有一定的风险性,因此初学者不建议使用do...while循环;
public static void main(String[] args){ int i = 1; do{ System.out.println("一下"); i++; }while(i == 10);//无条件循环一次 }
6.注意事项
for 和 while 的小区别:控制条件语句所控制的那个变量,在for循环结束后,就不能再被访问到了,而while循环结束还可以继续使用,如果你想继续使用,就用while,否则推荐使用for。原因是for循环结束,该变量就从内存中消失,能够提高内存的使用效率;
在已知循环次数的时候使用推荐使用for,循环次数未知的时推荐使用while;
7.跳出
7.1 break
使用场景:终止switch或者循环
在选择结构switch语句中
在循环语句中
离开使用场景的存在是没有意义的
7.2 continue
使用场景:结束本次循环,继续下一次的循环
7.3 死循环
也就是循环中的条件永远为true,死循环的是永不结束的循环。例如:while(true){}
是指一个循环的循环体是另一个循环。比如for循环里面还有一个for循环,就是嵌套循环。总共的循环次数=外循环次数*内循环次数;
for(初始化表达式①; 循环条件②; 步进表达式⑦) { for(初始化表达式③; 循环条件④; 步进表达式⑥) { 执行语句⑤; } }
//5*8的矩形,打印5行*号,每行8个 //外循环5次,内循环8次 public static void main(String[] args) { for (int i = 1; i <= 5; i++){ for (int j = 1; j <= 8; j++){ System.out.print("*"); } System.out.println(); } }