MySQL命令
将新创建的数据分配某个用户访问
grant all privileges on
zhouzdb
.* to ‘zhouz’@’%’ identified by ‘1234’;
flush privilegescentos 7启动/查看服务
systemctl start/restart mariadb.servcie
启动或者重启服务
systemctl status mariadb.service
查看指定服务的启动状态日志,如有错误信息,则可以直接发现,比如启动失败等信息。
网络状态
- 网络情况
netstat -anp
查看当前的网络端口占用情况,并关联相关的pid,方便查找进程相关信息。
Nodejs
- 升级nodejs至最新版本
sudo npm cache clean -f
sudo npm install -g npm@latest
sudo npm install -g n
sudo n stable
这里的N指特定的nodejs的版本,比如4.7.3, 这些版本可以到https://registry.npmjs.org/n 可以查找到对应的版本。
磁盘空间
- 查看当前电脑的磁盘分区
df -hm
Filesystem Size Used Avail Use% Mounted on
/dev/sda5 263G 133G 131G 51% /
devtmpfs 126G 0 126G 0% /dev
tmpfs 126G 12K 126G 1% /dev/shm
tmpfs 126G 795M 126G 1% /run
tmpfs 126G 0 126G 0% /sys/fs/cgroup
/dev/sdb1 33T 14T 18T 43% /data0
/dev/sda2 509M 168M 342M 33% /boot
tmpfs 26G 0 26G 0% /run/user/3457
参数说明: -h 表示以人类可以阅读的方式展示信息 -m 以M为单位, 默认以G为单位
- 查看目录的空间使用情况
du -hs
235M
表示当前目录使用了235M的空间 参数说明:
-a:显示目录占用的磁盘空间大小,还要显示其下目录和文件占用磁盘空间的大小
-s:显示目录占用的磁盘空间大小,不要显示其下子目录和文件占用的磁盘空间大小
-c:显示几个目录或文件占用的磁盘空间大小,还要统计它们的总和
--max-depth=1 显示目录的层次深度
du -ha : 统计当前目录下所有文件和目录的大小,并统计综合
3.4M ./img_2531.jpg
2.1M ./svai.jpg
104K ./zhangdong.jpg
436K ./test1.jpg
180K ./testimg/1.jpg
436K ./testimg/10.jpg
620K ./testimg/2.jpg
620K ./testimg/3.jpg
1.6M ./testimg/4.jpg
896K ./testimg/5.jpg
624K ./testimg/6.jpg
628K ./testimg/7.jpg
624K ./testimg/8.jpg
4.9M ./testimg/9.jpg
11M ./testimg
200M ./tensorflow_gpu-1.6.0-cp36-cp36m-manylinux1_x86_64.whl
1.3M ./pip-9.0.2.tar.gz
828K ./setuptools-39.0.1.zip
17M ./Python-3.6.4.tar.xz
235M .
du -hc : 统计当前目录下的目录,并统计其大小
11M ./testimg
235M .
235M total
testimg是当前目录下的子目录。
- 查看当前目录所在的分区
df -h
Filesystem Size Used Avail Use% Mounted on
/dev/sda5 263G 133G 131G 51% /
当前目录所在的磁盘分区为sda5
- 查看所有分区
fdisk -l
pip 常用设置
- 超时设置
在基于pip进行安装包的时候,偶尔会报出超时异常:
File "/export/guanghan/webapps/chenjunfeng1/python36env/lib/python3.6/site-packages/pip/download.py", line 560, in resp_read
decode_content=False):
File "/export/guanghan/webapps/chenjunfeng1/python36env/lib/python3.6/site-packages/pip/_vendor/urllib3/response.py", line 436, in stream
data = self.read(amt=amt, decode_content=decode_content)
File "/export/guanghan/webapps/chenjunfeng1/python36env/lib/python3.6/site-packages/pip/_vendor/urllib3/response.py", line 401, in read
raise IncompleteRead(self._fp_bytes_read, self.length_remaining)
File "/export/guanghan/webapps/chenjunfeng1/python364/lib/python3.6/contextlib.py", line 99, in __exit__
self.gen.throw(type, value, traceback)
File "/export/guanghan/webapps/chenjunfeng1/python36env/lib/python3.6/site-packages/pip/_vendor/urllib3/response.py", line 307, in _error_catcher
raise ReadTimeoutError(self._pool, None, 'Read timed out.')
pip._vendor.urllib3.exceptions.ReadTimeoutError: HTTPSConnectionPool(host='pypi.python.org', port=443): Read timed out.
这种问题一般是由于网路比较慢导致的超时,所以需要添加timeout设置
具体的命令: pip install package_name –timeout 1000
这里的1000是超时时间,单位为秒
- 安装指定版本
pip install package_name==2.3.7
- 从本地安装whl文件
pip install xxxx.whl
说明: 在包名之后指定版本号,使用”==”
检查操作版本
uname -a
输出结果信息为:
Linux office.rackaid.net 2.6.32-220.2.1.el6.x86_64 #1 SMP
Fri Dec 23 02:21:33 CST 2011 ×86_64 ×86_64 ×86_64 GNU/Linux
cat /etc/redhat-release
输出结果信息为:
CentOS release 6.2 (Final)
用户增加
useradd ‘xxxx’
passwd ‘xxxx’
ifconfig
yum install net-tools
curl代理使用
测试socks5命令:
curl –socks5 125.119.175.48:8909 http://example.com/
测试http命令:
curl –connect-timeout 2 -x 127.0.0.1:8118 http://google.com
———- 万恶的分割线,怎么这么快就到底了—————————
To be Continued.