服务器操作参考PDF 链接:https://pan.baidu.com/s/1bYI3qJ_RntqNZ4ehP9AIiQ 密码:31wn (注意加硬盘的时候,最好机器关机断电之后再插盘)我这边重构的时候把raid1改成了raid5,没有问题。
重构100%之后,进linux系统里操作(分区大于2T,用parted):
parted网上都有,我这边也引用别人操作,会用fdisk,基本上都能看懂:
[root@yinzhengjie ~]# parted /dev/sdb #进入/dev/sdb进行分区
GNU Parted 2.1
Using /dev/sdb
Welcome to GNU Parted! Type 'help' to view a list of commands.
(parted) mktable
New disk label type?
New disk label type? gpt #选择分区格式为gpt
Warning: The existing disk label on /dev/sdb will be destroyed and all data on
this disk will be lost. Do you want to continue? #这是一个警告,说是如果对这个这边进行分区,数据将会被覆盖而且数据会丢失,问你是否继续?
Yes/No? y #输入“y”,表示确定,进行下一步
(parted) mkpart #在命令行输出分区指令
Partition name? []? primary #分区类型为主分区,这是给分区起个名字,你可以自定义的,可以不用写我这里的参数,这里没有扩展分区一说,都是主分区。
File system type? [ext2]? ext4 #设置文件系统为ext4
Start? 0 #设置起始分配位置
End? 2G #设置结束分配位置
Warning: The resulting partition is not properly aligned for best performance.
Ignore/Cancel? i #输入i,忽略此提示即可
(parted) mkpart #继续分区
Partition name? []? primary #自定义名称
File system type? [ext2]? ext4 #指定文件系统格式为ext4
Start? 2G #由于上块磁盘分区的结束位置是2G,所以我们从最2G开始分配即可
End? 5G #定义结束位置为5G
(parted) mkpart #继续分区
Partition name? []? primary #自己自定义一个名字
File system type? [ext2]? ext4 #设置文件系统为ext4
Start? 5G #设置卷标的起始位置
End? 100% #输入100%,表示将剩下的所有容量都分配给该分区.
(parted) p #打印分区结果
Model: VMware, VMware Virtual S (scsi)
Disk /dev/sdb: 21.5GB
Sector size (logical/physical): 512B/512B
Partition Table: gpt
Number Start End Size File system Name Flags
1 17.4kB 2000MB 2000MB primary
2 2001MB 5000MB 2999MB primary
3 5000MB 21.5GB 16.5GB primary
(parted) quit #退出分区模式,不需要输入保存的按钮,退出来它会自动保存分区表信息。
Information: You may need to update /etc/fstab.