环境
win7+jdk7+flume1.7
注:最新版flume1.8需要jdk1.8支持
安装
jdk的安装不多赘述,flume1.7的安装。
进入官网:http://flume.apache.org/
然后找到1.7版本下载解压即可
根据官方文档quickStart
解压文件中打开docs文件夹中的index.html即可本地查看文档
扫描二维码关注公众号,回复:
2414428 查看本文章
进入Flume 1.7.0 User Guide 根据stepup进行操作:
根据A simple example的步骤。这里就不一一翻译原文,直接上实际步骤
1.在apache-flume-1.7.0-bin\conf目录下创建一个example.conf配置文件
然后把官文档中的案例内容复制到example.conf文件中,如下内容:
- # example.conf: A single-node Flume configuration
- # Name the components on this agent
- a1.sources = r1
- a1.sinks = k1
- a1.channels = c1
- # Describe/configure the source
- a1.sources.r1.type = netcat
- a1.sources.r1.bind = localhost
- a1.sources.r1.port = 44444
- # Describe the sink
- a1.sinks.k1.type = logger
- # Use a channel which buffers events in memory
- a1.channels.c1.type = memory
- a1.channels.c1.capacity = 1000
- a1.channels.c1.transactionCapacity = 100
- # Bind the source and sink to the channel
- a1.sources.r1.channels = c1
- a1.sinks.k1.channel = c1
2.进入到bin目录中打开cmd执行命令
不能直接复制粘贴官网的命令,那是对于linux的。
进入bin目录中,不建议直接双击flume-ng.cmd,因为这里有报错程序会直接退出,不能够看到错误信息。
执行方式,先打开cmd命令行,然后执行命令:
- flume-ng.cmd agent -conf ../conf --conf-file ../example.conf -name a1 -Dflume.root.logger=INFO,console
原因是参数有误。windows与linux一些命令格式有不同
更换执行命令:
- flume-ng.cmd agent -conf ../conf -conf-file ../conf/example.conf -name a1 -property flume.root.logger=INFO,console
参数的简要说明:指明conf文件路径、指明conf文件、指定agent、指明log打印信息级别和位置
执行效果:
说明启动成功。
3.通过telnet客户端进行测试
打开另一个cmd执行:
- telnet localhost 44444
如图输入状态的telnet客户端,输入信息后,flume即监听到并打印日志
注:windows的telnet客户端不能使用解决方式:
控制面板--->程序和功能----->打开或关闭windows功能---->勾选Telnet客户端并确认即可使用