【转载】Linux升级NTPD服务器-编译安装ntp-4.2.8p12与配置
1. 系统与软件版本
1.1 系统版本
rhel6.4(Red Hat Enterprise Linux Server release 6.4 (Santiago))
1.2 ntpd软件版本
ntp-4.2.8p12.tar.gz
1.3 下载地址
官方下载地址:http://support.ntp.org/bin/view/Main/SoftwareDownloads
参考文档:http://www.linuxfromscratch.org/blfs/view/svn/basicnet/ntp.html
2. 安装前提
2.1 安装依赖包
# 特别注意:先用命令rpm -qa | grep "gcc/gcc-c++/openssl-devel/ libstdc++* /libcap*"查看本系统是否已经安装有这些软件包,有的话就不需要再次安装!
[root@ntpserver ~]# yum install gcc gcc-c++ openssl-devel libstdc++* libcap*
一般显示输出的话就代表已经安装此软件包了!
2.2 备份旧版本的配置文件
2.3 卸载yum安装的ntpd服务
[root@ntpserver ~]# yum erase ntp ntpdate
3. 编译安装ntp-4.2.8p9
3.1 创建/var/lib/ntp目录
3.2 编译安装ntpd
# 这里要特别注意编译安装的命令格式:
4. 创建配置文件
5. 配置ntp.conf
在/etc/ntp.conf配置文件添加以下参数
server 127.127.1.0 # 这里以自己为ntpserver测试
fudge 127.127.1.0 stratum 10
下面是实际生产中的例子:
启动/重启ntpd服务
[root@ntpserver ~]# service ntpd start/restart
检查ntp服务是否开机启动,将其设置为开机启动。
[root@localhost ~]# chkconfig --list ntpd
ntpd 0:off 1:off 2:off 3:off 4:off 5:off 6:off
[root@localhost ~]# runlevel
N 3
[root@localhost ~]# chkconfig ntpd on #在运行级别2、3、4、5上设置为自动运行
[root@localhost ~]# chkconfig --list ntpd
ntpd 0:off 1:off 2:on 3:on 4:on 5:on 6:off
# 最后查看ntpd的版本,重启系统,验证服务:
6. 客户端配置
/etc/ntp.conf添加服务端IP地址
server 10.17.83.106
等待几分钟,ntpd客户端自动去同步服务端的时间
Windows客户端配置