Linux WiFi: Deauthenticated Reason Codes

转自:https://blog.csdn.net/ruiyiin/article/details/8751874


Code Reason Explanation
0 Reserved Normal working operation
1 Unspecific Reason We don’t know what’s wrong
2 Previous authentication no longer valid Client has associated but is not authorised.
3 Deauthenticated because sending STA is leaving (or has left) IBSS or ESS The access point went offline, deauthenticating the client.
4 Disassociated due to inactivity Client session timeout exceeded.
5 Disassociated because AP is unable to handle all currently associated STAs The access point is busy, performing load balancing, for example.
6 Class 2 frame received from nonauthenticated STA Client attempted to transfer data before it was authenticated.
7 Class 3 frame received from nonassociated STA Client attempted to transfer data before it was associated.
8 Disassociated because sending STA is leaving (or has left) BSS Operating System moved the client to another access point using non-aggressive load balancing.
9 STA requesting (re)association is not authenticated with responding STA Client not authorized yet, still attempting to associate with an access point.
10 Disassociated because the information in the Power Capability element is unacceptable  
11 Disassociated because the information in the Supported Channels element is unacceptable  
12 Reserved Not Used or Special Purpose
13 Invalid information element.  
14 Message integrity code (MIC) failure  
15 4-Way Handshake timeout  
16 Group Key Handshake timeout  
17 Information element in 4-Way Handshake different from (Re)Association Request/Probe
Response/Beacon frame
 
18 Invalid group cipher
or
Association denied due to requesting STA not supporting all of the data rates in the BSSBasicRateSet parameter
*NEW*
The link speed requested by the client or AP is incompatible. (i,e. trying to operate N only speeds on a G AP)
19 Invalid pairwise cipher  
20 Invalid AKMP  
21 Unsupported RSN information element version  
22 Invalid RSN information element capabilities  
23 IEEE 802.1X authentication failed  
24 Cipher suite rejected because of the security policy  
25-31 Reserved Not Used or Special Purpose
32 Disassociated for unspecified, QoS-related reason Quality of Service has denied the action.
33 Disassociated because QoS AP lacks sufficient bandwidth for this QoS STA  
34 Disassociated because excessive number of frames need to be acknowledged, but are not
acknowledged due to AP transmissions and/or poor channel conditions
 
35 Disassociated because STA is transmitting outside the limits of its TXOPs  
36 Requested from peer STA as the STA is leaving the BSS (or resetting)  
37 Requested from peer STA as it does not want to use the mechanism  
38 Requested from peer STA as the STA received frames using the mechanism for which a
setup is required
 
39 Requested from peer STA due to timeout  
45 Peer STA does not support the requested cipher suite  
45-65 Reserved Not Used or Special Purpose
99   Typically “No Reason Code” / Unknown State
535 Reserved Not Used or Special Purpose
The first few reason codes where helpful while debugging my wifi related issues.

猜你喜欢

转载自blog.csdn.net/h784707460/article/details/79937699