windows 安装laravel homestead后,卡在SSH auth method: private key

检查BIOS 是否开启，是否能支持VirtualBox工作；

Bringing machine ‘default’ up with ‘virtualbox’ provider…
==> default: Importing base box ‘laravel/homestead’…
==> default: Matching MAC address for NAT networking…
==> default: Setting the name of the VM: homestead
==> default: Clearing any previously set network interfaces…
==> default: Preparing network interfaces based on configuration…
default: Adapter 1: nat
default: Adapter 2: hostonly
==> default: Forwarding ports…
default: 80 (guest) => 8000 (host) (adapter 1)
default: 443 (guest) => 44300 (host) (adapter 1)
default: 3306 (guest) => 33060 (host) (adapter 1)
default: 5432 (guest) => 54320 (host) (adapter 1)
default: 22 (guest) => 2222 (host) (adapter 1)
==> default: Running ‘pre-boot’ VM customizations…
==> default: Booting VM…
==> default: Waiting for machine to boot. This may take a few minutes…
default: SSH address: 127.0.0.1:2222
default: SSH username: vagrant
default: SSH auth method: private key
然后ctrl + c 强制结束,再使用homestad halt关闭虚拟机.出现如下提示:

$ homestead halt
==> default: Attempting graceful shutdown of VM…
default: Guest communication could not be established! This is usually because
default: SSH is not running, the authentication information was changed,
default: or some other networking issue. Vagrant will force halt, if
default: capable.
==> default: Forcing shutdown of VM…

第一步：检查BIOS 是否开启，是否能支持VirtualBox工作；
第二步：windows默认终端不支持ssh连接，检查是否是终端使用问题；
第三步：检查下Homestead.yaml中的authorize,keys配置是否正确；建议重新生成ssh key试一下

参考链接：https://segmentfault.com/q/1010000006743045/a-1020000006745228