版权声明:本文为博主原创文章,未经博主允许不得转载。 https://blog.csdn.net/kakascx/article/details/83088556
结构体platform_device
注册设备使用结构体platform_device,源码路径include/linux/platform_device.h
struct platform_device {
const char * name;//设备名称,在sys/devices显示
int id;//设备id,用于插入总线并且具有相同name的设备编号,如果只有一个设备那么为-1
struct device dev;
u32 num_resources;
struct resource * resource;
const struct platform_device_id *id_entry;
/* MFD cell pointer */
struct mfd_cell *mfd_cell;
/* arch specific additions */
struct pdev_archdata archdata;
};
操作流程
- 注册设备
将设备结构体放到平台文件中,会自动注册设备,不用去调用注册设备的函数。平台文件路径根据架构选择,例如arch/arm/mach-exynos/mach-itop4412.c。在平台文件中加入设备的结构体,如
#ifdef CONFIG_HELLO_CTL
struct platform_device s3c_device_hello_ctl = {
.name = "hello_ctl",
.id =-1,
};
#endif
并加入内核链表中,
#ifdef CONFIG_HELLO_CTL
&s3c_device_hello_ctl,
#endif
- 在Kconfig文件中添加设备注册的宏定义
在/drivers/char/Kconfig文件中定义在/drivers/char/Kconfig文件中定义 - 配置menuconfig中的HELLO宏定义,生成新的.config文件
- make zImage生成新的zImage
- 注册完之后在虚拟平台总线下可以查到注册的设备ls /sys/devices/platform/