分析 ONU对接 任何厂商 ONU互联互通问题:首先要明确 OLT配置是否正确;客户是否使用同一个配置对接过其它厂商的ONU可以正常同业务呢??
像以下配置 可以看出 是OLT配置出了问题。
1、先查看 客户OLT的配置;
Username:admin
Password:admin
GPON> enable
GPON# configure terminal
查看了 OLT的版本信息
GPON# show version
Product Name : GPON
Software Version : R5.2.0V3316
Compiled by jenkins Tue Aug 29 20:18:09 CST 2017
Hardware Version : 1.1
Serial Num : 1111G82BY1707028
Contact :
Loction :
查看了当前gpon OLT接口下配置
GPON# configure terminal
GPON(config)# interface gpon-olt 1/1
GPON(config-gpon-olt1/1)# show running-config interface gpon-olt1/1
!
interface gpon-olt1/1
no shutdown
qos-queue-scheduler model hierarchy
!
查看光模块信息
GPON(config-gpon-olt1/1)# show optical module info
optical module tx power : 3.76 dbm
optical module temperature : 31.00 C
optical module voltage : 3.23 V
optical module bias current : 9.22 mA
查看 未注册ONU 信息
GPON(config-gpon-olt1/1)# show onuunconfig
gpon-olt onu-index info
1/1 1 sn:ZXICd70079fc pw:PD70079FC loid:123456789 loidpw:123456
Total: 1
注册ONU后 查看 ONU状态信息
GPON(config-gpon-olt1/1)#onu 1 type STG-402 sn ZXICd70079fc
GPON(config-gpon-olt1/1)# show onu status
gpon-onuauth-type auth-info state
-------------------------------------------------------------------------------------
1/1:1 snsn:ZXICd70079fc added
Total: 1
GPON(config-gpon-olt1/1)# show onu status
gpon-onuauth-type auth-info state
-------------------------------------------------------------------------------------
1/1:1 snsn:AZGPd70079fc auth pass
Total: 1
GPON(config-gpon-olt1/1)# show onu status
gpon-onuauth-type auth-info state
-------------------------------------------------------------------------------------
1/1:1 snsn:AZGPd70079fc operational
Total: 1
查看ONU能力及
GPON(config-gpon-olt1/1)# interface gpon-onu 1/1:1
GPON(config-gpon-onu1/1:1)# show onu remote capability
TCONT number: 15
GEMPort number: 256
Total priority queue number: 128
Up priority queue number: 120
Down priority queue number: 8
Traffic scheduler number: 15
Total Card number: 0
Total Ethuni number: 0
Card1 Ethuni number: 0
Operation Id: CTC
CTC Spec Version: V2.0
OnuType: HGU
Tx power supply control: 2
GPON(config-gpon-onu1/1:1)#
查看OLT上行接口配置信息
GPON(config)# show running-config interface ge1/1
!
interface ge1/1
no shutdown
speed 1000
duplex full
switchport mode trunk
switchport trunk tag 2-4094
storm-control broadcast pps 100
storm-control unicast pps 100
!
查看GPON OLT接口配置信息
GPON(config)# show running-config interface gpon-olt1/1
!
interface gpon-olt1/1
no shutdown
qos-queue-scheduler model hierarchy
onu 1 type STG-402 sn ZXICd70079fc
!
查看GPON ONU接口下配置信息
GPON(config)# show running-config interface gpon-onu1/1:1
!
interface gpon-onu1/1:1
tcont 1 profile default
gemport 1 tcont 1
service-port 1 gemport 1 user-vlan 100 transparent
remote service 1 gem 1 vlan 100
remote uni veip vlan-mode transparent
!
GPON(config)#
以上操作 针对 OLT 配置ONU基本业务所用到的操作步骤;都一一查看了一遍; 最终发现 Sino OLT的配置和 C300中兴OLT配置基本类似;命令风格也一样;于是结合中兴OLT的配置 方法 照搬照套 应用到Sino OLT上面来;
最后发现有一处 配置有问题:
问题在于 GPON ONU接口下配置:
service-port 1 gemport 1 user-vlan 100 transparent
修改为:service-port 1 gemport 1 user-vlan 100 vlan 100 即可实现业务通