Sys.argv[]是用来获取命令行参数的,sys.argv[0]表示代码本身文件路径,所以参数从1开始,以下两个例子说明:
1、使用sys.argv[]的一简单实例,
import sys,os
os.system(sys.argv[1])
这个例子os.system接收命令行参数,运行参数指令,保存为sample1.py,命令行带参数运行sample1.py notepad,将打开记事本程序。
2、这个例子是简明python教程上的,明白它之后你就明白sys.argv[]了。
1
import
sys
2 def readfile(filename): # 从文件中读出文件内容
3 ''' ''Print a file to the standard output. '''
4 f = file(filename)
5 while True:
6 line = f.readline()
7 if len(line) == 0:
8 break
9 print line, # notice comma 分别输出每行内容
10 f.close()
11 # Script starts from here
12 if len(sys.argv) < 2 :
13 print ' No action specified. '
14 sys.exit()
15 if sys.argv[ 1 ].startswith( ' -- ' ):
16 option = sys.argv[ 1 ][ 2 :]
17 # fetch sys.argv[1] but without the first two characters
18 if option == ' version ' : # 当命令行参数为-- version,显示版本号
19 print ' Version 1.2 '
20 elif option == ' help ' : # 当命令行参数为--help时,显示相关帮助内容
21 print ''' ''\
22 This program prints files to the standard output.
23 Any number of files can be specified.
24 Options include:
25 --version : Prints the version number
26 --help : Display this help '''
27 else :
28 print ' Unknown option. '
29 sys.exit()
30 else :
31 for filename in sys.argv[ 1 :]: # 当参数为文件名时,传入readfile,读出其内容
32 readfile(filename)
33
2 def readfile(filename): # 从文件中读出文件内容
3 ''' ''Print a file to the standard output. '''
4 f = file(filename)
5 while True:
6 line = f.readline()
7 if len(line) == 0:
8 break
9 print line, # notice comma 分别输出每行内容
10 f.close()
11 # Script starts from here
12 if len(sys.argv) < 2 :
13 print ' No action specified. '
14 sys.exit()
15 if sys.argv[ 1 ].startswith( ' -- ' ):
16 option = sys.argv[ 1 ][ 2 :]
17 # fetch sys.argv[1] but without the first two characters
18 if option == ' version ' : # 当命令行参数为-- version,显示版本号
19 print ' Version 1.2 '
20 elif option == ' help ' : # 当命令行参数为--help时,显示相关帮助内容
21 print ''' ''\
22 This program prints files to the standard output.
23 Any number of files can be specified.
24 Options include:
25 --version : Prints the version number
26 --help : Display this help '''
27 else :
28 print ' Unknown option. '
29 sys.exit()
30 else :
31 for filename in sys.argv[ 1 :]: # 当参数为文件名时,传入readfile,读出其内容
32 readfile(filename)
33
保存程序为sample.py.我们验证一下:
<!--[if !supportLists]-->1) <!--[endif]-->命令行带参数运行:sample.py –version 输出结果为:version 1.2
<!--[if !supportLists]-->2) <!--[endif]-->命令行带参数运行:sample.py –help 输出结果为:This program prints files……
<!--[if !supportLists]-->3) <!--[endif]-->在与sample.py同一目录下,新建a.txt的记事本文件,内容为:test argv;命令行带参数运行:sample.py a.txt,输出结果为a.txt文件内容:test argv,这里也可以多带几个参数,程序会先后输出参数文件内容。
fdfd源:http://www.cppblog.com/jerryma/archive/2009/08/01/91870.aspx
yyu