在单片机的编程中对于8位、16位、32位整数的分解与合并用的比较多，今天做了简要学习，后面还需要加以总结。

　　练习在VC++6.0编程环境中进行，源程序：
#include <stdio.h>
#include "string.h"

int main(int argc, char argv[])
{
unsigned int Data_Uint32=0x12345678;
unsigned short int Data_Uint16_1,Data_Uint16_2;
unsigned char Data_Uint8_1,Data_Uint8_2,Data_Uint8_3,Data_Uint8_4;
struct StructByte8{
unsigned char Byte01:1;
unsigned char Byte02:1;
unsigned char Byte03:1;
unsigned char Byte04:1;
unsigned char Byte05:1;
unsigned char Byte06:1;
unsigned char Byte07:1;
unsigned char Byte08:1;
} Test1;
unsigned char C1[]="A";
unsigned short int p16=(unsigned short int *)(&Data_Uint32);//定义16位的指针将32位地址强制转为16位，高位丢弃取低位
unsigned short int Data_Uint16_2p,Data_Uint16_1p;

  printf("32位整数：0x%x\n",Data_Uint32);
  printf("-------------------通过指针运算-------------------\n");
  Data_Uint16_2p=*(unsigned short int *)p16;
  Data_Uint16_1p=*((unsigned short int *)p16+1);
  printf("转换后的16位整数：0x%x,0x%x\n",Data_Uint16_1p,Data_Uint16_2p);

  Data_Uint8_1= *(unsigned char *)p16;
  Data_Uint8_2= *((unsigned char *)p16+1);
  Data_Uint8_3= *((unsigned char *)p16+2);
  Data_Uint8_4= *((unsigned char *)p16+3);
  printf("转换后的8位整数：0x%x,0x%x,0x%x,0x%x\n",Data_Uint8_1,Data_Uint8_2,Data_Uint8_3,Data_Uint8_4);

  Data_Uint8_1=0;Data_Uint8_2=0;Data_Uint8_3=0;Data_Uint8_4=0;
  //直接根据指针取值
  //将32位的整数分解成两个16位的整数,再取低位的16位
  //强制转换，丢弃高位的16位
  //32位转16位
  Data_Uint16_1=(unsigned short int)(Data_Uint32>>16);
  Data_Uint16_2=(unsigned short int)Data_Uint32;

  //32位转8位
  Data_Uint8_1= (unsigned char)(Data_Uint32>>24);
  Data_Uint8_2= (unsigned char)(Data_Uint32>>16);
  Data_Uint8_3= (unsigned char)(Data_Uint32>>8);
  Data_Uint8_4= (unsigned char)Data_Uint32;

  printf("-------------------通过位运算-------------------\n");
  printf("转换后的16位整数：0x%x,0x%x\n",Data_Uint16_1,Data_Uint16_2);
  printf("转换后的8位整数：0x%x,0x%x,0x%x,0x%x\n",Data_Uint8_1,Data_Uint8_2,Data_Uint8_3,Data_Uint8_4);

  printf("-------------------通过结构运算-------------------\n");     
  printf("字符A，ASCII为01000001，结构转换后的内容\n");  
  memcpy(&Test1, C1, sizeof(Test1));  
  printf("Test1.Byte08=%d \n",Test1.Byte08);  
  printf("Test1.Byte07=%d \n",Test1.Byte07);  
  printf("Test1.Byte06=%d \n",Test1.Byte06);  
  printf("Test1.Byte05=%d \n",Test1.Byte05);  
  printf("Test1.Byte04=%d \n",Test1.Byte04);  
  printf("Test1.Byte03=%d \n",Test1.Byte03);  
  printf("Test1.Byte02=%d \n",Test1.Byte02);  
  printf("Test1.Byte01=%d \n",Test1.Byte01);  

  Data_Uint8_1=0x89;Data_Uint8_2=0xAB;Data_Uint8_3=0xCD;Data_Uint8_4=0xEF;
  printf("-------------------通过位运算合并-------------------\n");
  Data_Uint16_1 = (unsigned short int)(Data_Uint8_1 << 8) | (unsigned short int)(Data_Uint8_2);
  Data_Uint16_2 = (unsigned short int)(Data_Uint8_3 << 8) | (unsigned short int)(Data_Uint8_4);
  Data_Uint32=(unsigned int) (Data_Uint16_1 << 16) | (unsigned int)(Data_Uint16_2);
  printf("合并前的8位整数：0x%x,0x%x,0x%x,0x%x\n",Data_Uint8_1,Data_Uint8_2,Data_Uint8_3,Data_Uint8_4);
  printf("合并后的16位整数：0x%x,0x%x\n",Data_Uint16_1,Data_Uint16_2);
  printf("合并后的32位整数：0x%x\n",Data_Uint32);

return 0;

}
输出：