常用命令:
display current 查看配置
super -----进入特权模式
system-view----进入系统配置模式
retur ---------退出系统配置模式
interface Ethernet 1/0/1---进入的端口
saved-configuration 交换机flash中保存的下次启动的配置
startup-configuration 交换机下次启动配置文件
interface端口
sysname 为设备命名
password cipher设置密码(密文)
save 保存配置
dhcp server ip-pool DHCP为每个VLAN提供IP地址。
switchport mode access 这是将交换机端口转换为ACCESS模式的命令,在默认情况下这个命令是不需要的,因为在默认情况下所有的端口就是这个模式,可以直接连接计算机等设备。另外常用的模式是Trunk,用于交换机之间级联传输VLAN信息的。
access ['ankses]
trunk [trank]
switchport access vlan ????????
vlan与端口的关系是什么?
vlan是虚拟局域网的意思。交换机端口默认属于一个组(一个VLAN),当你想把交换机端口划分为多组的时候,就需要建立多个VLAN,并将端口和相应的vlan关联。简单说,端口是vlan的成员。
查看交换机所有端口对应IP:display arp
display ip interface brie 用来显示三层接口的IP基本配置信息
interface Ethernet0/0/0 指的是以太网端口0下面的子端口0
interface GigabitEthernet1/0/0 指千兆以太网接口 1/0/0表示机器号/槽位号/子接口号
配置与修改h3c设备名称
注:在配置模式system-view下
命令:sysname xxx
配置与修改H3c设备本地telnet 登录用户名与密码
注:在配置模式system-view下
命令:local-user xxx(预设用户名)
password simple|cipher xxx 配置本地telnet用户 simple(明密)cipher(暗密)
保存:save 使用详解
save //此种保存只默认保存为Startup.cfg ,系统默认是加载此文件
The current configuration will be written to the device. Are you sure? [Y/N]:y
Please input the file name(*.cfg)[cf:/startup.cfg] //默认保存为cf:/startup.cfg
(To leave the existing filename unchanged, press the enter key): //回车即可
ip route-static
H3C网络设备配置命令行整理
猜你喜欢
转载自blog.csdn.net/weixin_40178556/article/details/78728477
今日推荐
周排行