ESXI主机常见问题:
1、esxi主机安装成功后默认时区为utc时区,修改为cst时区
1)使用vsphere client登录到目标ESXI主机
2)配置 --> 安全配置文件 --> 服务 --> 属性 --> SSH --> 选项 --> 启动
3)使用xshell远程登录esxi主机将centos服务器的/etc/localtime文件拷贝至esxi主机的/etc/localtime
4)使用date命令验证时区是否更改成功
5)为防止重启esxi主机时区变回utc做以下修改
①拷贝centos服务器的localtime文件至主机/vmfs/volumes/存储目录/
②修改esxi主机开机自启脚本,每次启动都复制时区文件到/etc目录
# vi /etc/rc.local.d/local.sh cp -rf /vmfs/volumes/5d9e07de-d85a72fc-5a52-20040ff9f88e/localtime /etc/localtime chmod 777 /etc/localtime
2、修改默认esxi主机web访问端口
# cat /etc/vmware/rhttpproxy/config.xml | grep httpPort <httpPort>80</httpPort> # 将80改为其他端口
3、esxi主机加入vcenter之后无法单独登录webclient问题
F2 --> Configure Lockdown mode 改成 disable