目录
4.1 iface_info_t *lookup_port(u8 mac[ETH_ALEN]);
4.2 void insert_mac_port(u8 mac[ETH_ALEN], iface_info_t *iface);
4.3 int sweep_aged_mac_port_entry();
4.4 void broadcast_packet(iface_info_t *iface, const char *packet, int len);
4.5 void handle_packet(iface_info_t *iface, char *packet, int len);
5.1 在当前目录下执行命令make,会生成一些必要的文件包括最重要的switch文件
5.3 利用xterm打开s1终端,并且在s1终端中执行switch(上面生成的那个)
5.4 wireshark分别监听h2和h3两个主机(&表示后台运行)
5.5 用h1 分别ping h2和h3 如果在wireshark监听中只看到了自己节点和h1节点发送的数据,表明我们实验成功了
1.写在前面
这个是我们的一个课程大作业,需要组队完成,但是奈何没找到队友,只有自己solo了,这个作业时间大概给了五周还是六周,但是实际上没有太多工作量,这个是好几个实验选择做的,我就多做了几个,写博客记录一下自己的实验过程。mininet这个工具我以前没有用过,所以也出了不少问题。也算是调试的一个心理路程。
github:https://github.com/Suyebiubiu/Switch-based-Mininet
2.安装工作
这个实验主要是需要在linux中运行的,我的系统用的Ubuntu,mininet应该是必须要在linux中运行,可以快速搭建模拟网络的平台,推荐使用Ubuntu系统,版本号从14.04到最新的都可以,64位或者32位都行。如果物理机是windows系统的话,可以使用虚拟机方式安装 Linux系统,推荐使用VirtualBox虚拟机 。运行Mininet环境时需要root权限,Mininet脚本只能使用 Python2来解释运行
2.1.mininet安装
2.2 cmake安装
sudo apt install cmake
2.3 xterm安装
sudo apt install xterm
2.4 wireshark安装
sudo apt install wireshark
3.作业要求:(交换机转发实验)
4.C语言完成函数编写工作
附件展示:
4.1 iface_info_t *lookup_port(u8 mac[ETH_ALEN]);
mac.c中的方法
// lookup the mac address in mac_port table
// FDB中寻找目的地址+port是否存在?
iface_info_t *lookup_port(u8 mac[ETH_ALEN])
{
// iface_info_t *iface = NULL;
// fprintf(stdout, "TODO: implement this function please.\n");
// return iface;
iface_info_t *iface = NULL;
mac_port_entry_t *entry,*q;
for (int i = 0; i < HASH_8BITS; i++) {
list_for_each_entry_safe(entry, q, &mac_port_map.hash_table[i], list) {
int cmp = memcmp((void*)entry->mac,(void*)mac,sizeof(u8)*ETH_ALEN); //ETH_ALEN==6
if(cmp==0) return entry->iface;
}
}
return iface;
}
4.2 void insert_mac_port(u8 mac[ETH_ALEN], iface_info_t *iface);
mac.c中的方法
// insert the mac -> iface mapping into mac_port table
//FDB插入packet源地址+port
void insert_mac_port(u8 mac[ETH_ALEN], iface_info_t *iface)
{
// fprintf(stdout, "TODO: implement this function please.\n");'
mac_port_entry_t *entry = malloc(sizeof(mac_port_entry_t));
bzero(entry, sizeof(mac_port_entry_t));
time_t now = time(NULL);
entry->visited = now;
memcpy(entry->mac,mac,sizeof(u8)*ETH_ALEN);
// memcpy(entry->iface,iface,sizeof(iface_info_t));
entry->iface=iface;
list_add_tail(&entry->list,&mac_port_map.hash_table[0]); //我加在第一张hash table可以? 为什么hash_table存储了所有的entry?
}
4.3 int sweep_aged_mac_port_entry();
mac.c中的方法
// sweeping mac_port table, remove the entry which has not been visited in the
// last 30 seconds.
int sweep_aged_mac_port_entry()
{
// int n = 0;
// fprintf(stdout, "TODO: implement this function please.\n");
// return n;
int n=0;
mac_port_entry_t *entry, *q;
time_t now = time(NULL);
for (int i = 0; i < HASH_8BITS; i++) {
list_for_each_entry_safe(entry,q, &mac_port_map.hash_table[i],list) {
if((int)(now - entry->visited) >= MAC_PORT_TIMEOUT){
n = entry->iface->index;
list_delete_entry(&entry->list);
free(entry);
return n;
}
}
}
return n;
}
4.4 void broadcast_packet(iface_info_t *iface, const char *packet, int len);
packet.c中的方法
// broadcast the packet among all the interfaces except the one receiving the
// packet, and free memory of the packet
//在所有的接口中广播(不包含当前接口)
void broadcast_packet(iface_info_t *iface, char *packet, int len)
{
iface_info_t *tx_iface = NULL;
list_for_each_entry(tx_iface, &instance->iface_list, list) {
if (tx_iface->index == iface->index)
continue;
iface_send_packet(tx_iface, packet, len);
}
}
4.5 void handle_packet(iface_info_t *iface, char *packet, int len);
main.c中的方法
// handle packet
// 1. if the dest mac address is found in mac_port table, forward it; otherwise,
// broadcast it.
// 2. put the src mac -> iface mapping into mac hash table.
void handle_packet(iface_info_t *iface, char *packet, int len)
{
//得到头部信息
struct ether_header *eh = (struct ether_header *)packet;
//fdb中寻找目的地址mac
iface_info_t *tx_iface = lookup_port(eh->ether_dhost);
if (tx_iface) {
iface_send_packet(tx_iface, packet, len);
}
else {
broadcast_packet(iface, packet, len);
}
//存入源mac+port
if (!lookup_port(eh->ether_shost)) {
insert_mac_port(eh->ether_shost, iface);
}
}
5.验证函数,检验实验结果
5.1 在当前目录下执行命令make,会生成一些必要的文件包括最重要的switch文件
5.2 打开mininet
5.3 利用xterm打开s1终端,并且在s1终端中执行switch(上面生成的那个)
5.4 wireshark分别监听h2和h3两个主机(&表示后台运行)
5.5 用h1 分别ping h2和h3 如果在wireshark监听中只看到了自己节点和h1节点发送的数据,表明我们实验成功了
大功告成!撒花✿✿ヽ(°▽°)ノ✿!!!!!!!!!!!!!!!!!