在很多应用中,需要使用深度图进行模型训练,一般操作是将深度图转为彩色图进行训练。
Matlab函数:label2rgb(),转换标记矩阵到RGB图像
参考网址:https://in.mathworks.com/help/images/ref/label2rgb.html
语法:
RGB = label2rgb(L,cmap,zerocolor)
RGB = label2rgb(L,cmap,zerocolor,order)
1)RGB = label2rgb(L)
输入:L——标记矩阵(可由labelmatrix, bwlabel, bwlabeln, watershed返回)
输出:RGB——彩色图像
注:根据L的数值对应,默认对应到colormap(jet)的色彩,返回RGB矩阵
2)RGB = label2rgb(L, map)
输入:L——标记矩阵(可由labelmatrix, bwlabel, bwlabeln, watershed返回)、map——颜色映射表
输出:RGB——彩色图像
注:map为n*3的矩阵,可以通过MATLAB的colormap函数来返回,比如colormap('jet')等。也可以根据要求自己定义。默认为colormap(jet)。
3)RGB = label2rgb(L, map, zerocolor)
defines the RGB color of the elements labeled 0 (zero) in the input label matrix L. As the value of zerocolor, specify an RGB triple or one of the strings listed in this table.
输入:L——标记矩阵(可由labelmatrix, bwlabel, bwlabeln, watershed返回)
map——颜色映射表
zerocolor——对应于标记0的颜色
输出:RGB——彩色图像
注:zerocolor可以取值如下表,默认为[1 1 1],即白色。
Value |
Color |
'b' |
蓝色 |
'c' |
蓝绿色 |
'g' |
绿色 |
'k' |
黑色 |
'm' |
洋红色 |
'r' |
红色 |
'w' |
白色 |
'y' |
黄色 |
4)RGB = label2rgb(L, map, zerocolor, order)
输入:L——标记矩阵(可由labelmatrix, bwlabel, bwlabeln, watershed返回)
map——颜色映射表
zerocolor——对应于标记0的颜色
order——标记矩阵和颜色映射表对应方式
输出:RGB——彩色图像
注:order默认为noshuffle,即根据L的数值来对应颜色。另外可以取值为shuffle,说明使用伪随机方式来对应。