部分命令来自

https://www.cnblogs.com/tid-think/p/10913680.html

https://segmentfault.com/a/1190000011579147?utm_source=tag-newest

下载这里的代码:

https://download.csdn.net/download/lionfire/12251562

驱动编译成功后,在wpa_supplicant_hostapd目录下,编译wpa工具

(A)wpa_supplicant_hostapd 0.8_rtw_20111118.zip

(1)wpa_supplicant

(1-1) unzip wpa_sup plicant_hostapd-0.8_rtw_2011 1118 .zip

(1-2 )cd wpa_supplicant_hostapd-0.8\wpa_supplicant

(1 3 )vim Makefile

added:

CC = mipsel linux gcc 这一句不用了

(1 4 ) CC= "$CC" make -j8

(1 5 )copy "wpa_supplicant" and "wpa_cli" to target platform

(1 6 )copy wpa_0_8.conf " file to target platform

(1 7 )wpa_supplicant -iwlan0 -Dwext -c wpa_0_8.conf -dd &

(1 8 )./wps_cli (for wps in Intera ctive mode)这一句不用了

(1 9) > help这一句不用了

> wps_pbc这一句不用了

> wps_pin any 12345678这一句不用了

实际命令如下:

ifconfig wlan0 up

wpa_supplicant -iwlan0 -Dwext -c /etc/wpa_0_8.conf -dd &

wpa_cli -i wlan0 scan

wpa_cli -i wlan0 scan_result

wpa_cli -i wlan0 add_network

wpa_cli -i wlan0 set_network 0 ssid '"NETGEAR49"' wpa_cli -i wlan0 set_network 0 psk '"13029932"' wpa_cli -i wlan0 enable_network 0

udhcpc -i wlan0

wpa_cli -i wlan0 save_config

保存后,以后每次执行上面黄色标亮的部分就可以了

如果不行这是手工方法:

#udhcpc -i wlan0 -s /etc/udhcpc.script -q

ifconfig wlan0 192.168.3.32

route add default gw 192.168.3.1