参考资料:
[1]内容P62 :https://wenku.baidu.com/view/31d9dc51b90d6c85ed3ac62c.html?pn=51
[2]C++代码:https://github.com/MRPT/mrpt/blob/mrpt-1.5/samples/ransac-demo-plane3D/test.cpp
[3]http://grunt1223.iteye.com/blog/961063
[4]https://blog.csdn.net/pi9nc/article/details/9083485
[5]https://blog.csdn.net/zouwen198317/article/details/38494149
[6]Ransac C++程序下载:http://yanivresearch.info/#software
目前拟合平面的方法和思路:
拟合平面就是估计模型参数,可以采用最小二乘进行估计模型参数,使用的工具有ceres,g2o,以及自己的实现,还有ransac的方法。
相比较最小二乘拟合模型参数,RANSAC的优势:
最小二乘是适应包含局外点在内点所有点。
ransac能得出一个仅仅用局内点计算出来的模型,局外点并不影响效果。
目前的opencv库中的ransac函数是:
目前的pcl库中的ransac函数是:
参考资料:
[1]https://www.cnblogs.com/li-yao7758258/p/6477007.html
[2]http://www.pclcn.org/study/shownews.php?lang=cn&id=62
[3]https://www.cnblogs.com/ironstark/p/4998037.html
RANSAC拟合模型参数整体思路:
//ransac思路:
//1随机选择点,对于拟合平面来说,最少需要3个点,然后计算出模型参数
//2用数据去检验估计的模型,看结果是否小于一定的阈值,得到小于阈值的点的个数,即内点个数
//3内点数量如果大于已经保存的内点数量,更新模型参数,内点较少的模型参数被遗弃,内点多的模型参数被保留
//4 步骤1和步骤3进行重复,不断迭代,从而找到内点个数最多的模型参数
//最后可以用内点做的再次估计模型参数,得到最终的模型参数
//写程序比较复杂
//能用伪代码写吗
//因为调用的库太多了
参考[5]的整体思路:
#include <math.h>
#include "LineParamEstimator.h"
//ZGx
//线参数估计器的构造函数的实现
//成员变量m_deltaSquared是啥意思?
//ZGx
LineParamEstimator::LineParamEstimator(double delta) : m_deltaSquared(delta*delta) {}
/*****************************************************************************/
/*
* Compute the line parameters [n_x,n_y,a_x,a_y]
* 通过输入的两点来确定所在直线,采用法线向量的方式来表示,以兼容平行或垂直的情况
* 其中n_x,n_y为归一化后,与原点构成的法线向量,a_x,a_y为直线上任意一点
*/
//ZGx
//data中的每个元素时一个指针
//parameter:斜率和一个点,得到模型参数
//ZGx
void LineParamEstimator::estimate(std::vector<Point2D *> &data,
std::vector<double> ¶meters)
{
parameters.clear();
//数据不能太少
if(data.size()<2)
return;
double nx = data[1]->y - data[0]->y;
double ny = data[0]->x - data[1]->x;// 原始直线的斜率为K,则法线的斜率为-1/k
double norm = sqrt(nx*nx + ny*ny);
//???parameters是啥呢?parameter:斜率和一个点,得到模型参数
parameters.push_back(nx/norm);
parameters.push_back(ny/norm);
parameters.push_back(data[0]->x);
parameters.push_back(data[0]->y);
}
/*****************************************************************************/
/*
* Compute the line parameters [n_x,n_y,a_x,a_y]
* 使用最小二乘法,从输入点中拟合出确定直线模型的所需参量
*/
//得到模型参数的另一个方法
void LineParamEstimator::leastSquaresEstimate(std::vector<Point2D *> &data,
std::vector<double> ¶meters)
{
double meanX, meanY, nx, ny, norm;
double covMat11, covMat12, covMat21, covMat22; // The entries of the symmetric covarinace matrix
int i, dataSize = data.size();
parameters.clear();
if(data.size()<2)
return;
meanX = meanY = 0.0;
covMat11 = covMat12 = covMat21 = covMat22 = 0;
for(i=0; i<dataSize; i++) {
meanX +=data[i]->x;
meanY +=data[i]->y;
covMat11 +=data[i]->x * data[i]->x;
covMat12 +=data[i]->x * data[i]->y;
covMat22 +=data[i]->y * data[i]->y;
}
meanX/=dataSize;
meanY/=dataSize;
covMat11 -= dataSize*meanX*meanX;
covMat12 -= dataSize*meanX*meanY;
covMat22 -= dataSize*meanY*meanY;
covMat21 = covMat12;
if(covMat11<1e-12) {
nx = 1.0;
ny = 0.0;
}
else { //lamda1 is the largest eigen-value of the covariance matrix
//and is used to compute the eigne-vector corresponding to the smallest
//eigenvalue, which isn't computed explicitly.
double lamda1 = (covMat11 + covMat22 + sqrt((covMat11-covMat22)*(covMat11-covMat22) + 4*covMat12*covMat12)) / 2.0;
nx = -covMat12;
ny = lamda1 - covMat22;
norm = sqrt(nx*nx + ny*ny);
nx/=norm;
ny/=norm;
}
parameters.push_back(nx);
parameters.push_back(ny);
parameters.push_back(meanX);
parameters.push_back(meanY);
}
/*****************************************************************************/
/*
* Given the line parameters [n_x,n_y,a_x,a_y] check if
* [n_x, n_y] dot [data.x-a_x, data.y-a_y] < m_delta
* 通过与已知法线的点乘结果,确定待测点与已知直线的匹配程度;结果越小则越符合,为
* 零则表明点在直线上
*/
//ZGX
//给定数据,判断是符合该模型
//m_deltaSquared是是否符合模型的阈值
//ZGX
bool LineParamEstimator::agree(std::vector<double> ¶meters, Point2D &data)
{
double signedDistance = parameters[0]*(data.x-parameters[2]) + parameters[1]*(data.y-parameters[3]);
return ((signedDistance*signedDistance) < m_deltaSquared);
}
//ZGx
//ransac思路:
//1随机选择点,对于拟合曲线来说,最少需要2个点,然后计算出模型参数
//2用数据去检验估计的模型,看结果是否小于一定的阈值,得到小于阈值的点的个数,存起来
//3 步骤1和步骤2不断进行重复,找到内点个数最多的模型参数
//最后可以用内点做的再次估计模型参数,得到最终的模型参数
//写程序比较复杂
//能用伪代码写吗
//因为调用的库太多了
//ZGx
/*****************************************************************************/
template<class T, class S>
double Ransac<T,S>::compute(std::vector<S> ¶meters,
ParameterEsitmator<T,S> *paramEstimator ,
std::vector<T> &data,
int numForEstimate)
{
std::vector<T *> leastSquaresEstimateData;
int numDataObjects = data.size();
int numVotesForBest = -1;
int *arr = new int[numForEstimate];// numForEstimate表示拟合模型所需要的最少点数,对本例的直线来说,该值为2
short *curVotes = new short[numDataObjects]; //one if data[i] agrees with the current model, otherwise zero
short *bestVotes = new short[numDataObjects]; //one if data[i] agrees with the best model, otherwise zero
//there are less data objects than the minimum required for an exact fit
if(numDataObjects < numForEstimate)
return 0;
// 计算所有可能的直线,寻找其中误差最小的解。对于100点的直线拟合来说,大约需要100*99*0.5=4950次运算,复杂度无疑是庞大的。一般采用随机选取子集的方式。
computeAllChoices(paramEstimator,data,numForEstimate,
bestVotes, curVotes, numVotesForBest, 0, data.size(), numForEstimate, 0, arr);
//compute the least squares estimate using the largest sub set
for(int j=0; j<numDataObjects; j++) {
if(bestVotes[j])
leastSquaresEstimateData.push_back(&(data[j]));
}
// 对局内点再次用最小二乘法拟合出模型
paramEstimator->leastSquaresEstimate(leastSquaresEstimateData,parameters);
delete [] arr;
delete [] bestVotes;
delete [] curVotes;
return (double)leastSquaresEstimateData.size()/(double)numDataObjects;
}